Datasheet4U Logo Datasheet4U.com

FAN602F - Offline Quasi-Resonant PWM Controller

General Description

The FAN602F is an advanced PWM controller aimed at achieving power density of ≥10W/in3 in universal input range AC/DC flyback isolated power supplies.

It incorporates Quasi-Resonant (QR) control with proprietary Valley Switching with a limited frequency variation.

Key Features

  • High Efficiency Across Wide Input and Output Conditions in a Small Form Factor.
  • Quasi-Resonant Switching Operation with Two Step Maximum Blanking Frequency (140 kHz and 75 kHz).
  • User Configurable Burst Mode Entry and Exit to Maximize Light-Load Efficiency and Minimize Audible Noise.
  • Adaptive Burst Mode Entry Level for Adaptive Charger.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN604H Offline Quasi-Resonant PWM Controller ON Semiconductor
FAN604P Offline Quasi-Resonant PWM Controller ON Semiconductor
FAN6080HMX Offline Quasi-Resonant PWM Controller ON Semiconductor
FAN6204A Synchronous Rectification Controller ON Semiconductor
FAN6241M6X Secondary Side Synchronous Rectifier Controller ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FAN602 Offline Quasi-Resonant PWM Controller
FAN602L Offline Quasi-Resonant PWM Controller
FAN6100HM Secondary-Side Constant Voltage and Constant Current Controller Compatible
FAN6100M Secondary-Side Constant Voltage and Constant Current Controller Compatible
FAN6100Q Secondary-Side Constant Voltage and Constant Current Controller Compatible

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FAN602F — Offline Quasi-Resonant PWM Controller June 2016 FAN602F Offline Quasi-Resonant PWM Controller Features  High Efficiency Across Wide Input and Output Conditions in a Small Form Factor  Quasi-Resonant Switching Operation with Two Step Maximum Blanking Frequency (140 kHz and 75 kHz)  User Configurable Burst Mode Entry and Exit to Maximize Light-Load Efficiency and Minimize Audible Noise  Adaptive Burst Mode Entry Level for Adaptive Charger Application  mWSaver® Technology for Ultra Low Standby Power Consumption (<20 mW)  Forced and Inherent Frequency Modulation of Valley Switching for Low EMI Emissions and Common Mode Noise  Built-In and User Configurable Over-Voltage Protection (OVP), Under-Voltage Protection (UVP) and Over-Temperature Protection (OTP)  Fully Programmabl