Datasheet4U Logo Datasheet4U.com

FAN7930C - Critical Conduction Mode PFC Controller

General Description

The FAN7930C is an active power factor correction (PFC) controller for boost PFC applications that operate in critical conduction mode (CRM).

It uses a voltagemode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn-off signal.

Key Features

  • PFC-Ready Signal Input Voltage Absent Detection Maximum Switching Frequency Limitation Internal Soft-Start and Startup without Overshoot Internal Total Harmonic Distortion (THD) Optimizer Precise Adjustable Output Over-Voltage Protection Open-Feedback Protection and Disable Function Zero-Current Detector (ZCD) 150μs Internal Startup Timer MOSFET Over-Current Protection (OCP) Under-Voltage Lockout with 3.5V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN7930C PFC Controller ON Semiconductor
FAN7930B PFC Controller ON Semiconductor
FAN7080-GF085 Half Bridge Gate Driver ON Semiconductor
FAN7083-GF085 High Side Gate Driver ON Semiconductor
FAN7085-GF085 High Side Gate Driver ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FAN7930 Critical Conduction Mode PFC Controller
FAN7930B Critical Conduction Mode PFC Controller
FAN7000D Low Power Amplifier
FAN7005 200mW Stereo Power Amplifier
FAN7021 CMOS Power Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FAN7930C — Critical Conduction Mode PFC Controller October 2010 FAN7930C Critical Conduction Mode PFC Controller Features ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ PFC-Ready Signal Input Voltage Absent Detection Maximum Switching Frequency Limitation Internal Soft-Start and Startup without Overshoot Internal Total Harmonic Distortion (THD) Optimizer Precise Adjustable Output Over-Voltage Protection Open-Feedback Protection and Disable Function Zero-Current Detector (ZCD) 150μs Internal Startup Timer MOSFET Over-Current Protection (OCP) Under-Voltage Lockout with 3.