FHP3450 Datasheet | Fairchild Semiconductor

Features - 0.1d B gain flatness to 30MHz - 0.07%/0.03° differential gain/phase error - 210MHz full power -3d B bandwidth at G = 2 - 1,100V/μs slew rate - ±55m A output current (drives dual video load) - ±83m A output short-circuit current - Output swings to within 1.3V of either rail - 3.6m A supply current per amplifier - Minimum stable gain of 3d B or 1.5V/V - FHP3350 - improved replacement for RC6333 - FHP3450 - improved replacement for RC6334 - Fully specified at +5V, and ±5V supplies Description The FHP3350 and FHP3450 are low-cost, high-performance, voltage-feedback amplifiers designed for video applications. These triple and quad amplifiers consume only 3.6m A of supply current per channel and are capable of driving dual (75Ω) video loads while providing 0.1d B of gain flatness to 30MHz. Consumer video applications also benefit from the low 0.07% differential gain and 0.03° differential phase errors. The FHP3350 offers three outputs that can be put into a high-impedance disable state to allow for video multiplexing or minimize power consumption. These amplifiers are designed to operate from 5V (±2.5V) to 12V (±6V) supplies. The outputs swing to within 1.3V of either supply rail to acmodate video signals on a single 5V supply. The FHP3350 and FHP3450 are designed on a plementary bipolar process. They provide 210MHz of full-power bandwidth and 1,100V/µs of slew rate at a supply voltage of ±5V. The bination of high performance, low power, and excellent video performance make these amplifiers well suited for use in many digital consumer video appliances as well as many generalpurpose, high-speed applications. Applications - Video driver - RGB driver - ADC buffer - S-video amp - Active filters Typical Application - Driving Dual Video Loads +Vs 75Ω Cable 75Ω Rf Rg 75Ω 75Ω +IN 75Ω Cable OUT 75Ω 75Ω Cable OUT 75Ω -Vs Ordering Information Part Number FHP3350IMTC14X FHP3350IM14X FHP3450IMTC14X FHP3450IM14X Moisture sensitivity level for all parts is MSL-1....