Datasheet4U Logo Datasheet4U.com

FM1233D - 3-Pin C Supervisor Circuit

General Description

The FM1233D is a supervisor circuit that monitors a microprocessor power supply or other system voltage and issues a reset pulse when a fault condition exists.

Several different threshold voltages are offered to accommodate 5V systems with different tolerances.

Key Features

  • a precision temperature-compensated voltage reference and comparator. When VCC falls to the threshold voltage, a RESET pulse is issued, holding the output in the active state. When power rises above VTH, the reset remains for approximately 250 ms to allow the system clock and other circuits to stabilize. The reset output of FM1233D is of open-drain active low type. Features s Precision monitoring of 5V and lower voltage microprocessor systems s VTH values of 4.62V, 4.38V and 4.12V s Automatic r.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FM1236 Desktop video & FM radio module system M/ N NXP
FM120 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectron
FM120 Silicon epitaxial planer type Formosa MS
FM120-M Silicon epitaxial planer type Formosa MS
FM120-MH Chip Schottky Barrier Diodes Formosa MS

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FM1233A 3-Pin C Supervisor Circuit
FM1233B 3-Pin C Supervisor Circuit
FM1233E 3-Pin C Supervisor Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FM1233D 3-Pin µC Supervisor Circuit February 2003 FM1233D 3-Pin µC Supervisor Circuit General Description The FM1233D is a supervisor circuit that monitors a microprocessor power supply or other system voltage and issues a reset pulse when a fault condition exists. Several different threshold voltages are offered to accommodate 5V systems with different tolerances. The device features a precision temperature-compensated voltage reference and comparator. When VCC falls to the threshold voltage, a RESET pulse is issued, holding the output in the active state. When power rises above VTH, the reset remains for approximately 250 ms to allow the system clock and other circuits to stabilize. The reset output of FM1233D is of open-drain active low type.