Datasheet4U Logo Datasheet4U.com

FM24C16U - 16K-Bit Standard 2-Wire Bus Interface Serial EEPROM

General Description

The FM24C16U/17U devices are 16,384 bits of CMOS nonvolatile electrically erasable memory.

These devices conform to all specifications in the Standard IIC 2-wire protocol.

They are designed to minimize device pin count and simplify PC board layout requirements.

Key Features

  • I Extended operating voltage 2.7V.
  • 5.5V I 400 KHz clock frequency (F) at 2.7V - 5.5V I 200µA active current typical 10µA standby current typical 1µA standby current typical (L) 0.1µA standby current typical (LZ) I IIC compatible interface.
  • Provides bi-directional data transfer protocol I Sixteen byte page write mode.
  • Minimizes total write time per byte I Self timed write cycle Typical write cycle time of 6ms I Hardware Write Protect for upper half (FM24C17U only) I End.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FM24C16 2-Wire Serial EEPROM Fudan
FM24C16A 16Kb FRAM Serial Memory Ramtron
FM24C16B 16-Kbit (2K x 8) Serial (I2C) F-RAM Cypress Semiconductor
FM24C16B 16Kb Serial 5V F-RAM Memory Ramtron
FM24C16B 2-Wire Serial EEPROM Fudan

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FM24C128 128K-Bit Standard 2-Wire Bus Interface Serial EEPROM
FM24C17U 16K-Bit Standard 2-Wire Bus Interface Serial EEPROM
FM24C02U 2K-Bit Standard 2-Wire Bus Interface Serial EEPROM
FM24C03U 2K-Bit Standard 2-Wire Bus Interface Serial EEPROM
FM24C04U 4K-Bit Standard 2-Wire Bus Interface Serial EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FM24C16U/17U – 16K-Bit Standard 2-Wire Bus Interface Serial EEPROM August 2000 FM24C16U/17U – 16K-Bit Standard 2-Wire Bus Interface Serial EEPROM General Description The FM24C16U/17U devices are 16,384 bits of CMOS nonvolatile electrically erasable memory. These devices conform to all specifications in the Standard IIC 2-wire protocol. They are designed to minimize device pin count and simplify PC board layout requirements. The upper half (upper 8Kbit) of the memory of the FM24C17U can be write protected by connecting the WP pin to VCC. This section of memory then becomes unalterable unless WP is switched to VSS.