FNA51060T3 Datasheet | Fairchild Semiconductor

FNA51060T3 Motion SPM® 55 Series Motion SPM® 55 Series September 2014 Features - UL Certified No. E209204 (UL1557) - 600 V - 10 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections - Low-Loss, Short-Circuit Rated IGBTs - Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing - Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input - HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection - Fault Output for Under-Voltage and Short-Circuit Current Protection - Inter-Lock Function to Prevent Short-Circuit - Shut-Down Input - HVIC Temperature-Sensing Built-In for Temperature Monitoring - Optimized for 5 k Hz Switching Frequency - Isolation Rating: 1500 Vrms / min. General Description FNA51060T3 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection Features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the ining logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Applications - Motion Control - Home Appliance / Industrial Motor Related Resources Figure 1. 3D Package Drawing (Click to Activate 3D Content) Package Marking and Ordering Information Device FNA51060T3 Device Marking FNA51060T3 Package SPMFA-A20 Packing Type RAIL Quantity...