Datasheet4U Logo Datasheet4U.com

FOD070L - Single Channel Optocoupler

General Description

The FOD070L, FOD270L and FOD073L optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector.

These devices are specified to operate at a 3.3V supply voltage.

Key Features

  • Low power consumption.
  • Low input current - 0.5 mA.
  • Available in single channel 8-pin DIP (FOD270L), 8-pin SOIC (FOD070L) and dual channel 8-pin SOIC.
  • High CTR-2000%.
  • High CMR-10 kV/µs.
  • Guaranteed performance over temperature 0°C to 70°C.
  • U. L. recognized (File # E90700).
  • LVTTL/LVCMOS Compatible output N/C 1 8 VCC + 1 V + 2 VF _ 3 6 VO _ V N/C 4 5 GND 3 6 V02 7 VB F1 8 VCC _ 2 7 V01 F2 + 4 5 GND FOD070L / FOD270L FOD0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FOD050L 3.3V and 5V High Speed Transistor Optocouplers ON Semiconductor
FOD053L 3.3V and 5V High Speed Transistor Optocouplers ON Semiconductor
FOD2711A Optically Isolated Error Amplifier ON Semiconductor
FOD3120 Gate Drive Optocoupler ON Semiconductor
FOD3125 Gate Drive Optocoupler ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FOD0708 Single Channel CMOS Optocoupler
FOD0710 25Mbit/sec Logic Gate Optocoupler
FOD0720 25Mbit/sec Logic Gate Optocoupler
FOD0721 25Mbit/sec Logic Gate Optocoupler
FOD0738 Dual Channel CMOS Optocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LVTTL/LVCMOS COMPATIBLE LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS SINGLE CHANNEL: DUAL CHANNEL: DESCRIPTION The FOD070L, FOD270L and FOD073L optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector. These devices are specified to operate at a 3.3V supply voltage. The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel device FOD073L, an integrated emitter – base resistor provides superior stability over temperature. The combination of a very low input current of 0.