Datasheet4U Logo Datasheet4U.com

FSA806 - USB2.0 High-Speed Audio Switch

General Description

The FSA806 is a 3:1 USB accessory switch that enables USB data, stereo and mono audio, and UART data to share a common connector port.

Two ports are designed for high-speed USB 2.0 signaling, while also capable of full speed USB and UART communication.

Key Features

  • 3:1 Switch Handles: - Audio Headsets - UART - Up to Two High- and Low-Speed USB Data.
  • Negative-Swing-Capable Audio Channel.
  • Built-in Termination Resistors for Audio Pop Reduction.
  • Simple Switch Control Using Two Select Pins.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSA8008A Audio Jack Detection and Configuration Switch ON Semiconductor
FSA8039A Audio Jack Interface ON Semiconductor
FSA831 USB2.0 High-Speed Charger Detection onsemi
FSA831A USB2.0 High-Speed Charger Detection ON Semiconductor
FSA07N60A N-Channel MOSFET IPS

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FSA8069 Audio Jack
FSA800 USB2.0 High-Speed Audio Switch
FSA8008 Audio Jack Detection and Configuration Switch
FSA8008A Audio Jack Detection and Configuration Switch
FSA8029 Audio Jack Send/End Detection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability July 2012 FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability Features  3:1 Switch Handles: - Audio Headsets - UART - Up to Two High- and Low-Speed USB Data  Negative-Swing-Capable Audio Channel  Built-in Termination Resistors for Audio Pop Reduction  Simple Switch Control Using Two Select Pins Description The FSA806 is a 3:1 USB accessory switch that enables USB data, stereo and mono audio, and UART data to share a common connector port. Two ports are designed for high-speed USB 2.0 signaling, while also capable of full speed USB and UART communication.