FSA881 Datasheet | Fairchild Semiconductor

.Data Sheet.co.kr FSA880 / FSA881 - USB Port 2:1 Switch with Accessory and Charger Detection November 2011 FSA880 / FSA881 - USB Port 2:1 Switch with Accessory and Charger Detection Features Switch Type 2:1 USB Automatic switching with Available Switch Mechanism Interrupt USB Data Cable Chargers (CDP, DCP, Travel Adapter, Accessory Detection Car Kit-CEA-936-A) Factory-Mode Cables USB FS and HS 2.0 pliant Battery Charging 1.1 pliant USB Charging Charger Detect, DCD, OVT (28V) UART Rx D and Tx D VBAT 3.0 to 4.4V Programmability I2 C ESD 15k V IEC 61000-4-2 Air Gap Operating -40°C to 85°C Temperature 16-Lead UMLP Package 1.8x2.6x0.55mm, 0.4mm Pitch FSA880 - Active LOW JIG Option FSA881 - Active HIGH FSA880UMX Ordering Information FSA881UMX Description The FSA88x is a high-performance switch featuring automatic switching and accessory detection for a USB port. The FSA88x allows sharing of a mon USB port to pass USB data, as well as factory programmability. In addition, the FSA88x integrates accessory detection of devices such as USB chargers and factory data cables. The FSA88x can be programmed for manual switching or automatic switching of data paths. VBUS_IN has 28V over-voltage tolerance. The difference between the FSA880 and the FSA881 is that FSA880 JIG output is an open-drain, active-LOW output, while FSA881 JIG is an active-HIGH, CMOS output. Applications - - Cellular Phones, Smart Phones MP3 and PMP Related Resources - - For samples and questions, please contact: Analog.Switch@fairchildsemi.. FSA880 / FSA881 Demonstration Board Typical Application USB Data USB CHARGING FACTORY TEST OVT PROTECTION FSA88x FSA9280A Figure 1. Mobile Phone Example © 2010 Fairchild Semiconductor Corporation FSA880 / FSA881 - Rev. 1.0.3 .fairchildsemi. Datasheet pdf - http://..net/ .Data...