Datasheet4U Logo Datasheet4U.com

FST16213 - 24-Bit Bus Exchange Switch

General Description

The Fairchild Switch FST16213 provides 24-bits of highspeed CMOS TTL-compatible bus switching or exchanging.

The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Key Features

  • s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level. Ordering Code: Order Number FST16213MEA FST16213MTD Package Number MS56A MTD56 Package.

📥 Download Datasheet

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FST16210 20-Bit Bus Switch
FST16211 24-Bit Bus Switch
FST16212 24-Bit Bus Exchange Switch
FST16209 18-Bit Bus Exchange Switch
FST162244 16-Bit Bus Switch with 25 Series Resistor in Outputs Preliminary
FST162244MTD 16-Bit Bus Switch with 25 Series Resistor in Outputs Preliminary
FST162245 16-Bit Bus Switch with 25 Series Resistors in Outputs
FST162245MTD 16-Bit Bus Switch with 25 Series Resistors in Outputs
FST16232 Synchronous 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
FST16232MEA Synchronous 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FST16213 24-Bit Bus Exchange Switch July 1997 Revised December 1999 FST16213 24-Bit Bus Exchange Switch General Description The Fairchild Switch FST16213 provides 24-bits of highspeed CMOS TTL-compatible bus switching or exchanging. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device operates as a 24-bit bus switch or a 12-bit bus exchanger, which allows data exchange between the four signal ports via the data-select terminals. Features s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level.