Datasheet4U Logo Datasheet4U.com

FSTD16861 - 20-Bit Bus Switch with Level Shifting

General Description

The Fairchild Switch FSTD16861 provides 20-bits of highspeed CMOS TTL-compatible bus switching.

The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Key Features

  • s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level. s TruTranslation voltage translation from 5.0V inputs to 3.3V outputs Ordering Code: Order Number FSTD16861MTD Package Number MTD48 Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FSTD16211 24-Bit Bus Switch
FSTD16244 16-Bit Bus Switch with Level Shifting (Preliminary)
FSTD162861 20-Bit Bus Switch with Level Shifting and 25 Series Resistors in Outputs Preliminary
FSTD16450 Configurable 4-Bit to 20-Bit Bus Switch
FSTD3125 4-Bit Bus Switch with Level Shifting
FSTD32211 40/48-Bit Bus Switch with Level Shifting
FSTD32450 Configurable 4-Bit to 40-Bit Bus Switch with Selectable Level Shifting (Preliminary)
FSTD3306 2-Bit Low Power Bus Switch with Level Shifting
FST16209 18-Bit Bus Exchange Switch
FST16210 20-Bit Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSTD16861 20-Bit Bus Switch with Level Shifting May 2001 Revised May 2001 FSTD16861 20-Bit Bus Switch with Level Shifting General Description The Fairchild Switch FSTD16861 provides 20-bits of highspeed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. A diode to VCC has been integrated into the circuit to allow for level shifting between 5V inputs and 3.3V outputs. The device is organized as a 10-bit or 20-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, Port 2A is connected to Port 2B. When OEX is HIGH, a high impedance state exists between the A and B Ports.