FSTU16211 Datasheet | Fairchild Semiconductor

Preliminary FSTU162211 24-Bit Bus Switch with - 2V Undershoot Protection and 25Ω Series Resistors in Outputs (Preliminary) June 2001 Revised June 2001 FSTU162211 24-Bit Bus Switch with - 2V Undershoot Protection and 25Ω Series Resistors in Outputs (Preliminary) General Description The Fairchild Switch FSTU162211 provides 24-bits of highspeed CMOS TTL-patible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device is organized as a 12-bit or 24-bit bus switch. When OE1 is LOW, the switch is ON and Port 1A is connected to Port 1B. When OE2 is LOW, Port 2A is connected to Port 2B. The A and B Ports are protected against undershoot to support an extended range to 2.0V below ground. Fairchild’s integrated Undershoot Hardened Circuit (UHC) senses undershoot at the I/O and responds by preventing voltage differentials from developing and turning the switch on. The FSTU162211 has equivalent 25Ω series resistors to reduce signal-reflection noise, eliminating the need for external terminating resistors. Features s Undershoot hardened to - 2V (A and B Ports) s Slower output enable times to prevent signal disruption s 25Ω switch connection between two ports s Minimal propagation delay through the switch s Low l CC s Zero bounce in flow-through mode s Control inputs patible with TTL level s See Applications Note AN-5008 for details Ordering Code: Order Number FSTU162211MTD Package Number MTD56 Package Description 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. UHC is a trademark of Fairchild Semiconductor Corporation. © 2001 Fairchild Semiconductor Corporation DS500064 .fairchildsemi. Preliminary FSTU162211 Logic Diagram Connection Diagram Truth Table Inputs OE1 L L H H OE2 L H L H Inputs/Outputs 1A,...