Datasheet4U Logo Datasheet4U.com

FSTU32160 - 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch

General Description

The Fairchild Switch FSTU32160 is a 16-bit to 32-bit highspeed CMOS TTL-compatible multiplexer/demultiplexer bus switch.

The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Key Features

  • s Undershoot hardened to.
  • 2V (A and B Ports). s Slower Output Enable times prevent signal disruption s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level. s See.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSTU32160 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch ON Semiconductor
FST100100 SCHOTTKY DIODE TRANSYS
FST100100 SCHOTTKY DIODE MODULE DACO
FST100100 Silicon Power Schottky Diode GeneSiC
FST100150 Silicon Power Schottky Diode GeneSiC

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FSTU32160A 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
FSTU3253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch
FSTU3257 Quad 2:1 Multiplexer/Demultiplexer Bus Switch with -2V Undershoot Protection
FSTU32X384 20-Bit Low Power Bus Switch with -2V Undershoot Protection
FSTU3125 4-Bit Bus Switch with −2V Undershoot Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSTU32160 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with −2V Undershoot Protection May 1999 Revised March 2000 FSTU32160 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with −2V Undershoot Protection General Description The Fairchild Switch FSTU32160 is a 16-bit to 32-bit highspeed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device can be used in applications where two buses need to be addressed simultaneously. The FSTU32160 is designed so that the A Port demultiplexes into B1 or B2 or both. The A and B Ports are “undershoot hardened” with UHC™ protection to support an extended range to 2.