FSUSB30 Datasheet | Fairchild Semiconductor

Features ? Low On Capacitance: 3.7p F (Typical) ? Low On Resistance: 6.5 (Typical) ? Low Power Consumption: 1µA (Maximum) - 10µA Maximum ICCT over an Expanded Control Voltage Range (VIN = 2.6V, VCC = 4.3V) ? Wide -3d B Bandwidth, >720MHz ? 8k V ESD Protection ? Power-Off Protection when VCC = 0V; D+/D- Pins can Tolerate up to 5.5V ? Packaged in: - 10-lead Micro Pak™ (1.6 x 2.1mm) - 10-lead MSOP - 10-lead UMLP (1.4 x 1.8mm) Applications ? Cell phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-top Box Related Application Notes ? AN-6022 Using the FSUSB30 / FSUSB31 to ply with USB 2.0 Fault Condition Requirements Description The FSUSB30 is a low-power, two-port, high-speed USB 2.0 switch. Configured as a double-pole double-throw (DPDT) switch, it is optimized for switching between two high-speed (480Mbps) sources or a Hi-Speed and Full Speed (12Mbps) source. The FSUSB30 is patible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7p F. The wide bandwidth of this device (720MHz), exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk minimizes interference. The FSUSB30 contains special circuitry on the D+/ Dpins which allows the device to withstand an overvoltage condition when powered off. This device is also designed to minimize current consumption even when the control voltage applied to the S pin, is lower than the supply voltage (VCC). This feature is especially valuable to ultraportable applications such as cell phones, allowing for direct interface with the general purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook puters. Ordering Information Order Number FSUSB30L10X Package Number MAC010A FSUSB30MUX MUA10A FSUSB30UMX MLP010A Product Code Top Mark Package Description 10-Lead Micro Pak,...