Datasheet4U Logo Datasheet4U.com

FUSB2805 - USB2.0 High-Speed OTG Transceiver

General Description

The FUSB2805 is a UTMI+ Low-Pin Interface (ULPI) USB2.0 OTG transceiver.

It is compliant with the Universal Serial Bus Specification Rev 2.0 (USB2.0), the ULPI Specification Rev.

1.1, and the On-The-Go (OTG) supplement to USB2.0, Rev.

Key Features

  • Complies with USB 2.0, OTG Rev 1.3 Supplement, and ULPI Rev 1.1 Specifications.
  • Supports 480 Mbps, 12 Mbps, and 1.5 Mbps USB2.0 Speeds - Integrated Termination Resistors Meet USB2.0 Resistor ECN - Integrated Serializer and Deserializer - Insertion and Removal of Stuffed Bits as Appropriate - USB Clock and Data Recovery to ±150ppm.
  • Supports USB OTG Rev 1.3 Host Negotiation Protocol (HNP) and Session Request Protocol (SRP).
  • 15 kV ESD, IEC 61000 Board Level, Air Gap.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FUSB251 Type-C CC and SBU Protection IC ON Semiconductor
FUSB252 Type-C CC ON Semiconductor
FUSB15200 Dual Port USB Type-C & PD Controller ON Semiconductor
FUSB301 Autonomous USB Type-C Controller ON Semiconductor
FUSB301A Autonomous USB Type-C Controller ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FUSB1500 USB2.0 Full-Speed / Low-Speed Transceiver
FUSB1501 USB2.0 Full-Speed / Low-Speed Transceiver
FUSB300C Programmable USB Type-C Controller
FUSB302 Programmable USB Type-C Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUSB2805 — USB2.0 High-Speed OTG Transceiver with ULPI Interface September 2013 FUSB2805 USB2.0 High-Speed OTG Transceiver with ULPI Interface Features  Complies with USB 2.0, OTG Rev 1.3 Supplement, and ULPI Rev 1.1 Specifications  Supports 480 Mbps, 12 Mbps, and 1.5 Mbps USB2.0 Speeds - Integrated Termination Resistors Meet USB2.0 Resistor ECN - Integrated Serializer and Deserializer - Insertion and Removal of Stuffed Bits as Appropriate - USB Clock and Data Recovery to ±150ppm  Supports USB OTG Rev 1.