Datasheet4U Logo Datasheet4U.com

FXL2T245 - Low Voltage Dual Supply 2-Bit Signal Translator

General Description

The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels.

The device allows translation between voltages as high as 3.6V to as low as 1.1V.

Key Features

  • s Bi-directional interface between any 2 levels from 1.1V to 3.6V s Fully configurable, inputs track VCC level s Non-preferential power-up sequencing; either VCC may be powered-up first s No power-up sequencing required s Outputs remain in 3-STATE until active VCC level is reached s Outputs switch to 3-STATE if either VCC is at GND s Power-off protection s Control inputs (T/R, OE) levels are referenced to VCCA voltage s Packaged in 10-lead Pb-Free MicroPak (1.6mm x 2.1mm) package s ESD protectio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXL2213 Wire Wound Molded SMD Power Inductors CJIANG
FXL0412 Wire Wound Molded SMD Power Inductors CJIANG
FXL0420 Wire Wound Molded SMD Power Inductors CJIANG
FXL0518 Wire Wound Molded SMD Power Inductors CJIANG
FXL0530 Wire Wound Molded SMD Power Inductors CJIANG

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator
FXL2SD106 Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator
FXL3SD206 Two-Port SDIO Mux/Demux Level-Shifting Voltage Translator
FXL4245 Low Voltage Dual Supply 8-Bit Signal Translator
FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FXL2T245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs January 2005 Revised January 2005 FXL2T245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs General Description The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.