H22LOI Datasheet | Fairchild Semiconductor

FEATURES - Black plastic housing - Choice of inverter or buffer output functions - Choice of open-collector or totem-pole output configuration 0.315 (8.0) C L - No contact switching - TTL/CMOS patible output functions 0.055 (1.40) 0.045 (1.14) 0.055 (1.40) 0.045 (1.14) 0.110 (2.8) 0.091 (2.3) PIN 1 ANODE PIN 2 CATHODE 2 3 4 1 5 PART NUMBER DEFINITIONS H22LTB H22LTI H22LOB H22LOI Totem-pole, buffer output Totem-pole, inverter output Open-collector, buffer output Open-collector, inverter output (Applies to Max Ratings and Characteristics Tables.) 0.295 (7.5) 0.272 (6.9) PIN 3 VCC PIN 4 VO 0.020 (0.51) (SQ) PIN 5 GND NOTES NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Lead cross section is controlled between .050 (1.27) from the seating plane and the end of the leads. 1. Derate power dissipation linearly 1.67 m W/°C above 25°C. 2. Derate power dissipation linearly 2.50 m W/°C above 25°C. 3. RMA flux is remended. 4. Methanol or isopropyl alcohols are remended as cleaning agents. 5. Soldering iron 1/16” (1.6mm) from housing. 6. As long as leads are not under any stress or spring tension. ABSOLUTE MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature Soldering Temperature EMITTER Continuous Forward Current Reverse Voltage Power Dissipation(1) SENSOR Output Current Supply Voltage Output Voltage Power Dissipation(1) (Iron)(3,4,5,6) Soldering Temperature (Flow)(3,4,6) (TA = 25°C unless otherwise specified) Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD IO VCC VO PD Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec 50 5 100 50 4.0 to 16 30 150 Units °C °C °C °C m A V m W m A V V m W 1 of 5 100011B H22L SERIES OPTOLOGIC® OPTICAL INTERRUPTER SWITCH ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER TEST CONDITIONS (TA =25°C) SYMBOL MIN. TYP. MAX. UNITS Operating Supply Voltage INPUT DIODE Forward Voltage Reverse Leakage Current COUPLED Operating...