HLMP-D401 Datasheet | Fairchild Semiconductor

FEATURES - Popular T-1 3/4 package - Low drive current - Solid state reliability - Wide viewing angle .040 (1.02) .350 (8.89) .330 (8.38) - Choice of pure green or soft orange colors 1.00 (25.4) MIN. DESCRIPTION These T-1 3/4 LEDs are widely used as general purpose indicators. The pure green lamps is made with a Ga P LED on a Ga P substrate. The soft orange is made with a Ga As P LED on a Ga P substrate. They are encapsulated in epoxy packages and are designed to provide superior light output and a wide viewing angle. .050 (1.27) .100 (2.54) .050 (1.27) REF. Ø .230 (5.84) .100 (2.54) REF. NOTES: 1. ALL DIMENSIONS ARE IN INCHES (mm). 2. TOLERANCES ARE ±.010” INCH UNLESS SPECIFIED. .023 (0.58) .017 (0.43) SQ. TYP. (2X) FLAT DENOTES CATHODE 3. AN EPOXY MENISCUS MAY EXTEND ABOUT .040” (1 mm) DOWN THE LEADS. ABSOLUTE MAXIMUM RATING Parameter Power Dissipation Forward Current Peak Forward Current (f=1k Hz, DF=10%) Lead Soldering Time at 260° C Operating Temperature Storage Temperature (TA =25°C) GREEN 110 40 200 5 -40 to +100 -40 to +100 ORANGE 110 40 200 5 -40 to +100 -40 to +100 UNITS m W m A m A sec °C °C  2001 Fairchild Semiconductor Corporation DS300013 2/27/01 1 OF 4 .fairchildsemi. T-1 3/4 (5mm) SOLID STATE LAMPS ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Spectral Line Half Width (nm) Reverse Voltage (V) Viewing Angle (°) - HLMP-D640 test condition is IF = 20m A 2.7 2.1 555 24 5 60 3.0 2.2 555 24 5 24 2.4 1.9 612 40 5 60 2.4 1.9 612 40 5 60 IF = 10m A IF = 10m A IR = 100µA IF = 10m A 1.0 3.0 6.7 6.0 2.1 3.5 4.0 7.0 IF = 10m A (TA =25°C) HLMP-D640- HLMP-D400 HLMP-D401 Condition IF = 10m A HLMP-D600 .fairchildsemi. 2 OF 4 2/27/01 DS300013 T-1 3/4 (5mm) SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES (TA...