Datasheet4U Logo Datasheet4U.com

RMBA09501 - Cellular 2 Watt Linear GaAs MMIC Power Amplifier

Description

The RMBA09501 is a highly linear Power Amplifier.

The two stage circuit uses our pHEMT process.

It is designed for use as a driver stage for Cellular base stations, or as the output stage for Micro- and Pico-Cell base stations.

Features

  • 2 Watt Linear output power at 36dBc ACPR1 for CDMA operation.
  • Small Signal Gain of > 30dB.
  • Small outline SMD package Device Absolute Ratings Symbol VDD VGS PRF TC TS Parameter Drain Supply Voltage1 Gate Supply Voltage RF Input Power (from 50Ω source) Case Operating Temperature Storage Temperature Min Max +10 -5 +5 +85 +100 Units V V dBm °C °C -30 -40 Note: 1. Only under quiescent conditions.
  • no RF applied. ©2004 Fairchild Semiconductor Corporation RMBA095.

📥 Download Datasheet

📁 Similar Datasheet

  • RMB05S - FAST RECOVERY SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER (Zibo Seno)
  • RMB05S - SURFACE MOUNT FAST RECOVERY BRIDGE RECTIFIER (DC COMPONENTS)
  • RMB10S - FAST RECOVERY SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER (Zibo Seno)
  • RMB10S - SURFACE MOUNT FAST RECOVERY BRIDGE RECTIFIER (DC COMPONENTS)
  • RMB1S - FAST RECOVERY SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER (Zibo Seno)
  • RMB1S - SURFACE MOUNT FAST RECOVERY BRIDGE RECTIFIER (DC COMPONENTS)
  • RMB2S - Surface Mount Bridge Rectifiers (EIC)
  • RMB2S - MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT FAST RECOVERY BRIDGE RECTIFIER (General Semiconductor)
  • RMB2S - Miniature Glass Passivated Fast Recovery Surface Mount Bridge Rectifier (Vishay)
  • RMB2S - Fast Recovery Bridge Rectifier (Taiwan Semiconductor)
Other Datasheets by Fairchild Semiconductor
  • RMBA19500 - PCS 2 Watt Linear GaAs MMIC Power Amplifier
  • RMBA19500A - PCS1900 2 Watt GaAs MMIC Power Amplifier

Full PDF Text Transcription

Click to expand full text
RMBA09501 May 2004 RMBA09501 Cellular 2 Watt Linear GaAs MMIC Power Amplifier General Description The RMBA09501 is a highly linear Power Amplifier. The two stage circuit uses our pHEMT process. It is designed for use as a driver stage for Cellular base stations, or as the output stage for Micro- and Pico-Cell base stations. The amplifier has been optimized for high linearity requirements for CDMA operation. Features • 2 Watt Linear output power at 36dBc ACPR1 for CDMA operation • Small Signal Gain of > 30dB • Small outline SMD package Device Absolute Ratings Symbol VDD VGS PRF TC TS Parameter Drain Supply Voltage1 Gate Supply Voltage RF Input Power (from 50Ω source) Case Operating Temperature Storage Temperature Min Max +10 -5 +5 +85 +100 Units V V dBm °C °C -30 -40 Note: 1.
Published: |