Datasheet4U Logo Datasheet4U.com

ML6553 - Bus Termination Regulator

General Description

The ML6553 switching regulator is designed to convert voltage supplies ranging from 2.0V to 3.6V into a desired output voltage or termination voltage for various applications.

The ML6553 can be implemented to produce regulated output voltages in two different modes.

Key Features

  • Can source and sink up to 1A.
  • Generates termination voltages for DDR SDRAM, SSTL_2 SDRAM, SGRAM, or equivalent memories.
  • Generates termination voltages for active termination schemes for GTL+, DDR, Rambus™, VME, LV-TTL, PECL and other high speed logic.
  • VL regulated to within 3% at 800mA.
  • Minimum external components. Requires no feedback compensation.
  • Fixed frequency operation for easier system integration.
  • Lower power consumption th.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML6554 3A Bus Termination Regulator Micro Linear
ML65541 High Speed Octal Buffer/Line Drivers Micro Linear
ML6509 Active SCSI Terminator Micro Linear
ML6510 Series Programmable Adaptive Clock Manager (PACMan) Micro Linear
ML6516244 16-Bit Buffer/Line Driver with 3-State Outputs Micro Linear

Other Datasheets by Fairchild (now onsemi)

Part Number Description
ML6554 3A Bus Termination Regulator
ML6415 S-Video Filter with Summed Composite Output / Sound Trap / and Group Delay Compensation
ML6416 S-Video Filter with Summed Composite Output / Sound Trap / and Group Delay Compensation
ML6426 High Bandwidth Triple Video Filters with Buffered Outputs for RGB or YUV
ML6427 75W Quad Video Cable Drivers and Filters with Switchable Inputs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.fairchildsemi.com ML6553 Bus Termination Regulator Features • Can source and sink up to 1A • Generates termination voltages for DDR SDRAM, SSTL_2 SDRAM, SGRAM, or equivalent memories • Generates termination voltages for active termination schemes for GTL+, DDR, Rambus™, VME, LV-TTL, PECL and other high speed logic • VL regulated to within 3% at 800mA • Minimum external components. Requires no feedback compensation • Fixed frequency operation for easier system integration • Lower power consumption than passive, resistor divider termination, reducing heat by as much as 50% • Separate voltages for VCCQ and PVDD General Description The ML6553 switching regulator is designed to convert voltage supplies ranging from 2.0V to 3.