Datasheet4U Logo Datasheet4U.com

MM74HC423A - Dual Retriggerable Monostable Multivibrator

General Description

The 74HC423A high speed monostable multivibrators (one shots) utilize advanced silicon-gate CMOS technology.

They feature speeds comparable to low power Schottky TTL circuitry while retaining the low power and high noise immunity characteristic of CMOS circuits.

Key Features

  • both a negative, A, and a positive, B, transition triggered input, either of which can be used as an inhibit input. Also included is a clear input that when taken LOW resets the one shot. The MM74HC423A cannot be triggered from clear. The MM74HC423A is retriggerable. That is, it may be triggered repeatedly while its outputs are generating a pulse and the pulse will be extended. Pulse width stability over a wide range of temperature and supply is achieved using linear CMOS techniques. The output.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MM74HC4020 14-Stage Binary Counter National Semiconductor
MM74HC4040 12-Stage Binary Counter National Semiconductor
MM74HC4075 Triple 3-Input OR Gate National Semiconductor
MM74HC4511 BCD-to-7 Segment Latch / Decoder / Driver National Semiconductor
MM74HC4543 BCD-to-7 Segment Latch/Decoder/Driver National Semiconductor

Other Datasheets by Fairchild (onsemi)

Part Number Description
MM74HC4020 14-Stage Binary Counter 12-Stage Binary Counter
MM74HC4040 14-Stage Binary Counter 12-Stage Binary Counter
MM74HC4046 CMOS Phase Lock Loop
MM74HC4049 Hex Inverting Logic Level Down Converter
MM74HC4050 Hex Logic Level Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MM74HC423A Dual Retriggerable Monostable Multivibrator September 1983 Revised February 1999 MM74HC423A Dual Retriggerable Monostable Multivibrator General Description The 74HC423A high speed monostable multivibrators (one shots) utilize advanced silicon-gate CMOS technology. They feature speeds comparable to low power Schottky TTL circuitry while retaining the low power and high noise immunity characteristic of CMOS circuits. Each multivibrator features both a negative, A, and a positive, B, transition triggered input, either of which can be used as an inhibit input. Also included is a clear input that when taken LOW resets the one shot. The MM74HC423A cannot be triggered from clear. The MM74HC423A is retriggerable.