Datasheet4U Logo Datasheet4U.com

NC7SZ373 - TinyLogic UHS D-Type Latch

General Description

The NC7SZ373 is a single positive edge-triggered D-type CMOS Latch with 3-STATE output from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving SC70 6-lead package.

Key Features

  • s Space saving SC70 6-lead package s Ultra small MicroPak leadless package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; ±24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number NC7SZ373P6X NC7SZ373L6X Package Number MAA.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NC7SZ373 TinyLogic UHS D-Type Latch ON Semiconductor
NC7SZ374 TinyLogic UHS D-Type Flip-Flop ON Semiconductor
NC7SZ32 TinyLogic UHS Two-Input OR Gate ON Semiconductor
NC7SZ332 TinyLogic UHS 3-Input OR Gate ON Semiconductor
NC7SZ38 TinyLogic UHS 2-Input NAND Gate ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
NC7SZ374 TinyLogic UHS D-Type Flip-Flop
NC7SZ32 UHS 2-Input OR Gate
NC7SZ332 TinyLogic UHS 3-Input OR Gate
NC7SZ38 TinyLogic UHS 2-Input NAND Gate
NC7SZ384 TinyLogic UHS 1-Bit Low Power Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NC7SZ373 TinyLogic UHS D-Type Latch with 3-STATE Output June 1998 Revised May 2003 NC7SZ373 TinyLogic UHS D-Type Latch with 3-STATE Output General Description The NC7SZ373 is a single positive edge-triggered D-type CMOS Latch with 3-STATE output from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage.