Datasheet4U Logo Datasheet4U.com

NC7SZ74 - TinyLogic UHS D-Type Flip-Flop

Description

The NC7SZ74 is a single D-type CMOS Flip-Flop with preset and clear from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving US8 package.

Features

  • s Space saving US8 surface mount package s MicroPak leadless package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; ± 24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Product Order Number Package Number Code Top Mark Z74 N9 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on.

📥 Download Datasheet

Datasheet preview – NC7SZ74

📁 Similar Datasheet

  • NC7SZ74 - TinyLogic UHS D-Type Flip-Flop (ON Semiconductor)
  • NC7SZ00 - UHS Two-Input NAND Gate (ON Semiconductor)
  • NC7SZ02 - TinyLogic UHS Two-Input NOR Gate (ON Semiconductor)
  • NC7SZ04 - TinyLogic UHS Inverter (ON Semiconductor)
  • NC7SZ05 - TinyLogic UHS Inverter (ON Semiconductor)
  • NC7SZ08 - Tiny UHS 2-Input AND Gate (National Semiconductor)
  • NC7SZ08 - TinyLogic UHS Two-Input AND Gate (ON Semiconductor)
  • NC7SZ10 - TinyLogic UHS 3-Input NAND Gate (ON Semiconductor)
  • NC7SZ11 - TinyLogic UHS Three-Input AND Gate (ON Semiconductor)
  • NC7SZ125 - TinyLogic UHS Buffer (ON Semiconductor)
Other Datasheets by Fairchild

Full PDF Text Transcription

Click to expand full text
NC7SZ74 TinyLogic UHS D-Type Flip-Flop with Preset and Clear July 2001 Revised June 2003 NC7SZ74 TinyLogic UHS D-Type Flip-Flop with Preset and Clear General Description The NC7SZ74 is a single D-type CMOS Flip-Flop with preset and clear from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving US8 package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. The output tolerates voltages above VCC in the 3-STATE condition.
Published: |