24C64 Datasheet | FairchildSemiconductor

FM24C64 - 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM December 2001 FM24C64 - 64K-Bit Standard 2-Wire Bus Interface Serial EEPROM General Description FM24C64 is a 64Kbit CMOS non-volatile serial EEPROM organized as 8K x 8 bit memory. This device confirms to Extended IIC 2-wire protocol that allows accessing of memory in excess of 16Kbit on an IIC bus. This serial munication protocol uses a Clock signal (SCL) and a Data signal (SDA) to synchronously clock data between a master (e.g. a microcontroller) and a slave (EEPROM). FM24C64 is designed to minimize pin count and simplify PC board layout requirements. FM24C64 offers hardware write protection where by the entire memory array can be write protected by connecting WP pin to VCC. This section of memory then bees unalterable until the WP pin is switched to VSS. “LZ” and “L” versions of FM24C64 offer very low standby current making them suitable for low power applications. This device is offered in SO, TSSOP and DIP packages. Fairchild EEPROMs are designed and tested for applications requiring high endurance, high reliability and low power consumption. Features I Extended operating voltage: 2.5V to 5.5V I Up to 400 KHz clock frequency at 2.5V to 5.5V I Low power consumption - 0.5mA active current typical - 10µA standby current typical - 1µA standby current typical (L version) - 0.1µA standby current typical (LZ version) I Schmitt trigger inputs I 32 byte page write mode I Self timed write cycle (6ms typical) I Hardware Write Protection for the entire array I Endurance: up to 100K data changes I Data Retention: Greater than 40 years I Packages: 8-Pin DIP, 8-Pin SO and 8-Pin TSSOP I Temperature range - mercial: 0°C to +70°C - Industrial (E): -40°C to +85°C - Automotive (V): -40°C to +125°C Block...