SE110-00 - SET-TOP VIDEO POST FILTER

Key Features

! Drives two composite outputs and one Y/C output ! accurate factory set gain of 0 dB (6 dB optional - order SE110-60) ! 75Ω output termination resistors provided ! sinx/x correction for 27 MHz sampling ! high input impedance - makes interfacing easy ! DC coupling eliminates tilt problems associated with AC coupling ! DC offset of encoder output (due to single rail operation) is corrected to bring blanking level near zero ! 24-pin j-lead surface mount package FILTER.

SE110-00 set-top video post filter by Faraday - Datasheet Preview

Datasheet Details

Part number	SE110-00
Manufacturer	Faraday
File Size	69.09 KB
Description	SET-TOP VIDEO POST FILTER
Datasheet	SE110-00 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SE1103	High Speed Infrared Light Emitting Diode	NEC Electronics
SE110N	Error Amplifier	Sanken
SE1117-xx	LDO Linear Regulator	SandE
SE1117A	1A Low Dropout Positive Adjustable/Regulator	SeCoS
SE115N	Error Amplifier	Sanken

Other Datasheets by Faraday

Part Number	Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SE110-00 SET-TOP VIDEO POST FILTER The SE110-00 is a surface mountable active hybrid module designed to interface Philips SAA7185 series digital video encoders to 75Ω composite (CMPS), Luma (Y) and Chroma (C) outputs. Use of high performance operational amplifiers ensures minimal differential phase/gain errors and the ability to drive ± 2.5V into 75Ω loads.