FP6183 Datasheet | Feeling Technology

Description The FP6183 is a buck regulator with a built in internal power MOSFET. It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. The device includes cycle-by-cycle current limiting and thermal shutdown protection. Adjustable soft-start reduced the stress on the input source at power-on. The regulator only consumes 23µA supply current in shutdown mode. The FP6183 requires a minimum number of readily available external ponents to plete a 2A buck regulator solution. Features - - - - - - - - - - - 2A Output Current 0.2Ω internal Power MOSFET Switch Stable with Low ESR Output Ceramic Capacitors Up to 95% Efficiency 23µA Shutdown Mode Current Fixed 210KHz Frequency Thermal Shutdown Cycle-by-Cycle Over Current Protection Wide 4.75 to 23V Operating Input Range Output Adjustable From 1.23 to 18V Available SOP-8L Package - Under Voltage Lockout Applications - Distributed Power Systems - Battery Charger - Pre-Regulator for Linear Regulators - DSL Modems Typical Application Circuit IN BS EN VOUT FB GND P This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent acpany the sales of the product. Website: http://.feeling-tech..tw Rev. 0.63 1/13 FP6183 Function Block Diagram Internal Regulator 1u A Slope pensation Σ Current Sense 5V Enable Control Oscillator 130/210KHz Control Logic UVLO 0.7V Current...