Datasheet4U Logo Datasheet4U.com

FP7209 - Non-Synchronous PWM Boost Controller

General Description

The FP7209 is boost topology switching regulator for LED driver.

It provides built-in gate driver pin for driving external N-MOSFET.

The non-inverting input of error amplifier connects to a 0.25V reference voltage.

Key Features

  • Start-up Voltage: 2.8V.
  • Wide Supply Voltage Operating Range: 5V to 24V.
  • Precision Feedback Reference Voltage: 0.25V (Max. ).
  • Analog and Digital Dimming Control.
  • Shutdown Current: 6μA (Max. ) / TSSOP-14L(EP).
  • Programmable Switching Frequency: 100KHz~1000KHz.
  • Programmable Soft Start Function (SS).
  • Input Under Voltage Protection (UVP).
  • Output Over Voltage Protection (OVP).
  • LED Short Circuit Protection (SCP).
  • Switching MOSFET Over Current Protect.

📥 Download Datasheet

Datasheet Details

Part number FP7209
Manufacturer Feeling Technology
File Size 872.35 KB
Description Non-Synchronous PWM Boost Controller
Datasheet download datasheet FP7209 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP750SOT343 PACKAGED LOW NOISE/ MEDIUM POWER PHEMT Filtronic Compound Semiconductors
FP75R06KE3 IGBT Infineon
FP75R07N2E4 IGBT Infineon
FP75R12KE3 IGBT eupec GmbH
FP75R12KE3 IGBT Infineon

Other Datasheets by Feeling Technology

Part Number Description
FP7201 Constant Current Switching Regulator
FP7208 Non-Synchronous PWM Boost Controller
FP7208B Non-Synchronous PWM Boost Controller
FP726 LED driver IC
FP701 Single Operational Amplifier and Voltage Reference

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FP7209 Non-Synchronous PWM Boost Controller for LED Driver General Description The FP7209 is boost topology switching regulator for LED driver. It provides built-in gate driver pin for driving external N-MOSFET. The non-inverting input of error amplifier connects to a 0.25V reference voltage. It has programmable soft start time and switching frequency set by external capacitor and resistor. There are four functions to protect system circuit, such as UVP, OVP, SCP and OCP. The LED current can be adjusted by an external signal connecting to the DIM pin. DIM pin accepts either a DC voltage or a PWM signal. The PWM signal filter components are contained within the chip. Current mode control and external compensation network make is easy and flexible to stabilize the system.