Datasheet4U Logo Datasheet4U.com

FMA246 - HIGH GAIN X-BAND MMIC AMPLIFIER

General Description

The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth.

The supply voltage can be varied from +3V to +6V if needed.

Key Features

  • 8.0.
  • 14.0 GHz Operating Bandwidth 2.5 dB Noise Figure 30 dB Small-Signal Gain 19 dm Output Power +6V Single Bias Supply Adjustable Operating Current DC De-coupled Input and Output Ports Preliminary Datasheet v3.0 LAYOUT: www. DataSheet4U. com.

📥 Download Datasheet

Datasheet Details

Part number FMA246
Manufacturer Filtronic Compound Semiconductors
File Size 426.74 KB
Description HIGH GAIN X-BAND MMIC AMPLIFIER
Datasheet download datasheet FMA246 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FMA2 Emitter common Rohm
FMA2A Dual Digital Transistors Rohm
FMA1 General purpose (dual digital transistors) Rohm
FMA1-06025 EC AXIAL FAN Qualtek
FMA1-08038 EC AXIAL FAN Qualtek

Other Datasheets by Filtronic Compound Semiconductors

Part Number Description
FMA219 X-BAND LNA MMIC
FMA3007 2-20GHZ BROADBAND MMIC AMPLIFIER
FMA3019QFN HIGH LINEARITY INTEGRATED BALANCED AMPLIFIER MODULE
FMA500 OC-192 MODULATOR PRE-DRIVER AMPLIFIER
FMA501 OC-192 MODULATOR DRIVER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FMA246 HIGH GAIN X-BAND MMIC AMPLIFIER FEATURES: • • • • • • • 8.0 – 14.0 GHz Operating Bandwidth 2.5 dB Noise Figure 30 dB Small-Signal Gain 19 dm Output Power +6V Single Bias Supply Adjustable Operating Current DC De-coupled Input and Output Ports Preliminary Datasheet v3.0 LAYOUT: www.DataSheet4U.com GENERAL DESCRIPTION: The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth. The supply voltage can be varied from +3V to +6V if needed. Operating current can be adjusted using the source resistor ladders located along the bottom edge, by bonding a particular pad to ground. The amplifier is unconditionally stable over all load states (-45 to +85°C), and conditionally stable if the input port is opencircuited.