T25S32
Overview
- Serial Peripheral Interface(SPI) - Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD - Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD - Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
- Read - Normal Read (Serial): 50MHz clock rate - Fast Read (Serial): 108MHz clock rate - Dual/Quad (Multi-I/O) Read: 108MHz clock rate
- Program - Serial-input Page Program up to 256bytes - Program Suspend and Resume
- Erase - Block erase (64/32 KB) - Sector erase (4 KB) - Chip erase - Erase Suspend and Resume
- Program/Erase Speed - Page Program time: 0.7ms typical - Sector Erase time: 60ms typical - Block Erase time: 0.2/0.3s typical - Chip Erase time: 20s typical
- Flexible Architecture - Sector of 4K-byte - Block of 32/64K-byte
- Low Power Consumption - 20mA maximum active current - 5uA maximum power down current
- Software/Hardware Write Protection - 3x256-Byte Security Registers with OTP Lock - Enable/Disable protection with WP Pin - Write protect all/portion of memory via software - Top or Bottom, Sector or Block selection
- Single Supply Voltage - Full voltage range: 2.7~3.6V
- Temperature Range - Commercial (0℃ to +70℃) - Industrial (-40℃ to +85℃)
