Datasheet4U Logo Datasheet4U.com

FP5510 - 10-Bit DAC 120mA VCM Driver

General Description

The FP5510 is a single 10-bit DAC with 120mA output current voice coil motor (VCM) driver, with an I2C-compatible serial interface that operates at clock rates up to 400kHz.

Its supply operates from 2.3V to 3.6V.

The FP5510 incorporates with a power-on reset circuit, power-down function.

Key Features

  • Power Supply Voltage Rang: 2.3V to 3.6V.
  • VCM Driver for Auto-Focus.
  • 10-Bit Resolution Current Sinking of 120mA for VCM.
  • 2-Wire I2C Interface (1.8V Interface Compatible).
  • Internal 4 Slope Control Mechanism 1. Enhance Slope Control Mode 2. One Step Mode 3. Linear Slope Mode 4. Two Step Slope Mode.
  • Power-Save Mode Current < 1μA.
  • Power On Reset (POR).
  • Small Size: 0.7mm×1.1mm (6-Balls WLCSP).

📥 Download Datasheet

Datasheet Details

Part number FP5510
Manufacturer Fiti
File Size 827.07 KB
Description 10-Bit DAC 120mA VCM Driver
Datasheet download datasheet FP5510 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP5001 PWM CONTROL IC Feeling Technology
FP5001 PWM Controller Feeling Technology
FP5003 High Frequency PWM Controller Feeling Technology
FP502 DC-DC Converter Applications Sanyo Semicon Device
FP50N06L 50A/ 60V/ 0.022 Ohm/ Logic Level N-Channel Power MOSFETs Intersil Corporation

Other Datasheets by Fiti

Part Number Description
FP5501 Low Voltage 2-Channel Bi-Directional Motor Driver
FP5502 Low-voltage 1 channels Bi-directional Motor Driver
FP5503 120mA Current Sinking 10-Bit I2C DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
18948314942 0755-82570180 Email zqf2851339685@szparkson.net QQ 2851339685 38 3807A FP5510 10-Bit DAC 120mA VCM Driver with I2C Interface Description The FP5510 is a single 10-bit DAC with 120mA output current voice coil motor (VCM) driver, with an I2C-compatible serial interface that operates at clock rates up to 400kHz. Its supply operates from 2.3V to 3.6V. The FP5510 incorporates with a power-on reset circuit, power-down function. Power-on reset circuit ensure when supply power up, DAC output is to 0V until valid write bit value takes place. In power down mode, the supply current is about 1μA. The FP5510 is designed for auto focus operation includes digital camera module, optical zoom camera phones and lens auto focus. The I2C address of FP5510 is 0x18h.