Datasheet4U Logo Datasheet4U.com

FP6321 - Sunchronous Buck PWM DC-DC Controller

General Description

The FP6321 is designed to drive two N-channel MOSFETs in a synchronous rectified buck topology.

It provides the output adjustment, internal soft-start, frequency compensation networks, monitoring and protection functions into a single package.

Key Features

  • over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Features.
  • Operates from +5V or +12V.
  • Drives Two Low Cost N-Channel MOSFETs.
  • Fast Transient Response.
  • Simple Single-Loop Control Design ( Voltage-Mode PWM Control).
  • Internal Soft-Start.
  • Over-Current Fault Monitor.
  • SOP-8 Package.
  • RoHS.

📥 Download Datasheet

Datasheet Details

Part number FP6321
Manufacturer Fitipower
File Size 605.95 KB
Description Sunchronous Buck PWM DC-DC Controller
Datasheet download datasheet FP6321 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr fitipower integrated technology lnc. FP6321 Synchronous Buck PWM DC-DC Controller Description The FP6321 is designed to drive two N-channel MOSFETs in a synchronous rectified buck topology. It provides the output adjustment, internal soft-start, frequency compensation networks, monitoring and protection functions into a single package. The IC operating at fixed 300kHz frequency provides simple, single feedback loop, voltage mode control with fast transient response. The resulting PWM duty ratio ranges from 0-100%. The FP6321 features over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package.