Overview: 9201 Independence Avenue Chatsworth, CA 91311, USA (818) 407-3420 • (800) 356-6387 Fax (818) 700-1961 SIGNAL CONDITIONERS & CONVERTERS PA1001A Series
INTRODUCTION
The PA1001A series preamplifiers/signal conditioners and converters are suitable for use with either magnetic or RF type pickup coils and allow convenient interfacing with the process measuring devices and digital electronics. When used with Magnetic type pickups they accept low level signals and produces a pulse output, while providing rejection of unwanted noise and false signals. A RF type pickup reduces the pickup drag associated with conventional magnetic pickups, resulting in a significant increase in the usable range. The PA1001A series excite a RF type pickup with a 20KHz signal. Motion of ferrous material is sensed and the motion modulates the coil field and subsequent conditioning provides a pulse output signal. The output signal of the PA1001A series have a square pulse wave form, each pulse representative of an actuator (rotor blade, gear tooth, turbine blade, etc.) passing by the sensing area of the pickup. Four output signal options are available: TTL/CMOS patible, open collector, 0 to10VDC square wave, and a square wave that is tied to the input power. The unit is powered by a user supplied 8 to 30 VDC filtered power supply. An onboard regulator provides the required regulation and noise rejection.
