FR801
FR801 is FAST RECOVERY RECTIFIER manufactured by Formosa MS.
FEATURES
- Low forward voltage drop
- High current capability
- High reliability
- High surge current capability
.412 (10.5) MAX. .108 (2.75)
8.0 Amperes
3.8 f +.2 HOLE THRU
TO-220A
.180 (4.6) .050 (1.27)
.248 (6.3)
MECHANICAL DATA
- Case: Molded plastic
- Epoxy: UL 94V-0 rate flame retardant
- Lead: Lead solderable per MIL-STD-202, method 208 guranteed
- Polarity: As Marked
- Mounting position: Any
- Weight: 2.24 grams
.040 (1.0) MAX. .051 MAX. (1.3) .040 MAX. (1.0) .200 (5.08) + CASE
.595 (15.1) MAX.
.550 (14.0) .158 (4.0) MIN. MAX. .120 (3.05) PIN 1 + CASE PIN 2 Case Negative Suffix "R"
PIN 1 PIN 2
+
Case Positive
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Tc=75 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 8.0A Maximum DC Reverse Current Tc=25 C at Rated DC Blocking Voltage Tc=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ, TSTG
NOTES:
FR801 50 35 50
FR802 100 70 100
FR803 200 140 200 8.0
FR804 400 280 400
FR805 600 420 600
FR806 UNITS 800 V 560 V V 800 A A V m A
200 1.3 10.0 200 150 -65 65 +150 250 500 m A n S p F C
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
RATING AND CHARACTERISTIC CURVES (FR801 THRU FR806)
FIG.1-TYPICAL FORWARD CHARACTERISTICS...
