Datasheet4U Logo Datasheet4U.com

17517 - Dual Motor Driver

General Description

of each pin can be found in the Functional Pin Description section beginning on page 9.

Key Features

  • 2.0 V to 6.8 V Continuous Operation.
  • Output Current 1.0 A (DC), 3.0 A (Peak).
  • MOSFETs < 600 mΩ RDS(ON) @ 25°C Guaranteed.
  • 3.0 V/ 5.0 V TTL- / CMOS-Compatible Inputs.
  • PWM Frequencies up to 200 kHz.
  • Undervoltage Shutdown 17517 DUAL MOTOR DRIVER DTB SUFFIX 98ASH70247A 16-PIN TSSOP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
17510 1.2A 15V H-Bridge motor driver NXP
17511 H-Bridge Motor Driver NXP
17512LJC XC17512LJC Xilinx
1751A 1550nm DWDM DFB Laser Module EMCORE
1750-XC6DT2 DIESEL ENGINE-GENERATOR SET MTU Onsite Energy

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
17511A H-Bridge Motor Driver
17533 Dual H-Bridge Motor Driver
17550 Quad H-Bridge Micromotor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Freescale Semiconductor Advance Information Document Number: MPC17517 Rev. 2.0, 7/2006 1.0 A 6.8 V Dual Motor Driver IC The 17517 is a monolithic triple totem-pole-output power IC designed to be used in portable electronic applications to control small DC motors and solenoids. The 17517 can operate efficiently with supply voltages as low as 2.0 V to as high as 6.8 V. Its low RDS(ON) totem-pole output MOSFETs (0.46 Ω typical) can provide continuous drive currents of 1.0 A and handle peak currents up to 3.0 A. It is easily interfaced to low-cost MCUs via parallel 3.0 V- or 5.0 V-compatible logic. The device can be pulse width modulated (PWM-ed) at up to 200 kHz.