Datasheet4U Logo Datasheet4U.com

33199 - Automotive ISO 9141 Serial Link Driver

Datasheet Summary

Description

of each pin can be found in the Functional Pin Description section, beginning on page 12.

Pin Number 1 2 3 4 5 Pin Name VCC REF-IN-L REF-IN-K LO RXD Definition 5V typical power supply pin.

typical supply current is less than 1.5mA Input reference for C2 comparator.

Features

  • Electrically Compatible with Specification “Diagnosis System ISO9141”.
  • Transmission speed up to 200kBaud.
  • Internal Voltage Reference Generator for Line Comparator Thresholds.
  • TXD, RXD and LO pins are 5V CMOS Compatible.
  • High Current Capability of DIA pin (K line).
  • Short Circuit Protection for the K Line Input.
  • Over Temperature Shutdown with Hysteresis.
  • Large Operating Range of Driver Supply Voltage.
  • Large Operating.

📥 Download Datasheet

Datasheet preview – 33199

Datasheet Details

Part number 33199
Manufacturer Freescale Semiconductor
File Size 280.34 KB
Description Automotive ISO 9141 Serial Link Driver
Datasheet download datasheet 33199 Datasheet
Additional preview pages of the 33199 datasheet.

📁 Similar Datasheet

  • 331-1KF01-AL - Technical Data (ETC)
  • 3310 - Linear Low Density Polyethylene (TAISOX)
  • 3310 - (3310x) Three Phase Bridge (VMI)
  • 3310-001 - Square Sealed Panel Control (Bourns Electronic)
  • 3310-002 - Square Sealed Panel Control (Bourns Electronic)
  • 3310C-001 - Square Sealed Panel Control (Bourns Electronic)
  • 3310C-002 - Square Sealed Panel Control (Bourns Electronic)
  • 3310C-101 - Square Sealed Panel Control (Bourns Electronic)
  • 3310F - (3310x) Three Phase Bridge (VMI)
  • 3310GH - AP3310GH (Advanced Power Electronics)
Other Datasheets by Freescale Semiconductor
  • 33198 - Automotive High-Side TMOS Driver
  • 33186 - H-Bridge Driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Freescale Semiconductor Technical Data Document Number: MC33199 Rev. 4.0, 10/2006 Automotive ISO 9141 Serial Link Driver The MC33199 is a serial interface circuit used in diagnostic applications. It is the interface between the microcontroller and the special K and L lines of the ISO diagnostic port. The MC33199 has been designed to meet the «Diagnosis System ISO9141» specification. The device has a bi-directional bus K line driver, fully protected against short circuits and over temperature. It also includes the L line receiver, used during the wake up sequence in the ISO transmission. The MC33199 has a unique feature which allow transmission Baud rate up to 200kBaud.
Published: |