Datasheet4U Logo Datasheet4U.com

MC10XS4200 - 10 mOhm High Side Switch

General Description

Introduction Pin Assignment and Functions Functional Internal Block Description Functional Device Operation Operation and Operating Modes Protection and Diagnostic

Key Features

  • Two fully protected 10 mΩ (@ 25 °C) high side switches Up to 6.0 A steady state current per channel Separate bulb and DC motor latched over-current handling Individually programmable internal/external PWM clock signals Over-current, short-circuit, and over-temperature protection with programmable autoretry functions Accurate temperature and current sensing Open-load detection (channel in OFF and ON state),.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10XS4200 Dual 24V 10mOhm high-side switch NXP
MC1001 (MC1002 / MC1003) 6 input Gates Motorola
MC1002 6 SEGMENT x 7 GRID LED Driver ABOV
MC100E016 8-BIT SYNCHRONOUS BINARY UP COUNTER ON Semiconductor
MC100E016 8-Bit Synchronous Binary Up Counter Motorola

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MC10XS3412 Quad High Side Switch
MC10XS3435 Quad High Side Switch
MC10XS3535 Smart Front Corner Light Switch
MC10XSC425 Quad High Side Switch
MC10XSD200 Dual 10 mOhm High Side Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Advance Information Document Number: MC10XS4200 Rev. 2.0, 6/2012 Dual 24 V, 10 mOhm High Side Switch The 10XS4200 device is part of a 24 V dual high side switch product family with integrated control, and a high number of protective and diagnostic functions. It has been designed for truck, bus, and industrial applications. The low RDS(ON) channels (<10 mΩ) can control different load types; bulbs, solenoids, or DC motors. Control, device configuration, and diagnostics are performed through a 16-bit serial peripheral interface (SPI), allowing easy integration into existing applications. Both channels can be controlled individually by external or internal clock signals, or by direct inputs. Using the internal clock allows fully autonomous device operation.