MCF52212 Datasheet | Freescale Semiconductor

overview of the 32-bit MCF52211 microcontroller, focusing on its highly integrated and diverse feature set. This 32-bit device is based on the Version 2 Cold Fire core operating at a frequency up to 80 MHz, offering high performance and low power consumption. On-chip memories connected tightly to the processor core include up to 128 Kbytes of flash memory and 16 Kbytes of static random access memory (SRAM). On-chip modules include: - V2 Cold Fire core delivering 76 MIPS (Dhrystone 2.1) at 80 MHz running from internal flash memory with Multiply Accumulate (MAC) Unit and hardware divider - Universal Serial Bus On-The-Go (USBOTG) - USB Transceiver - Up to three universal asynchronous/synchronous receiver/transmitters (UARTs) - Two inter-integrated circuit (I2C™) bus interface modules - Queued serial peripheral interface (QSPI) module - Eight-channel 12-bit fast analog-to-digital converter (ADC) - Four 32-bit input capture/output pare timers with DMA support (DTIM) - Four-channel general-purpose timer (GPT) capable of input capture/output pare, pulse width modulation (PWM), and pulse accumulation - Eight-channel/Four-channel, 8-bit/16-bit pulse width modulation timer - Two 16-bit periodic interrupt timers (PITs) - Real-time clock (RTC) module - Programmable software watchdog timer - Interrupt controller capable of handling 57 sources - Clock module with 8 MHz on-chip relaxation oscillator and integrated phase-locked loop (PLL) - Test access/debug port (JTAG, BDM) This document contains information on a product under development. Freescale reserves the right to change or discontinue this product without notice. © Freescale Semiconductor, Inc., 2007. All rights reserved. Table of Contents MCF52211 Family Configurations - - - - . .3 1.1 Features - - - - - - - . .4 1.2 Reset Signals - - - - - - . .22 1.3 PLL and Clock Signals - . ....