Datasheet4U Logo Datasheet4U.com

PC33991 - Gauge Driver Integrated Circuit

General Description

H-Bridge Output.

This is the output pin of a half bridge, designed to source or sink current.

The H-Bridge pins linearly drive the sine and cosine coils of two separate stepper motors to provide four-quadrant operation.

Key Features

  • including: PR EL IM.
  • MMT-licensed two-phase stepper motor compatible.
  • Minimal processor overhead required.
  • Fully integrated pointer movement and position state machine with air core movement emulation.
  • 4096 possible steady state pointer positions.
  • 3 40° maximum pointer sweep Linear 4500° 2 Max pointer velocity of 400° Analog micro stepping (12 steps/degree of pointer movement) Poin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PC33991DH Gauge Driver Integrated Circuit Motorola Inc
PC33991R2 Gauge Driver Integrated Circuit Motorola Inc

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
PC33996 16-Output Switch
PC33999 16-Output Switch
PC33926 Throttle Control H-Bridge
PC33975 Multiple Switch Detection Interface
PC33975A Multiple Switch Detection Interface
PC33981 Self-Protected High-Side Switch
PC33710 Dual Output DC-DC & Linear Regulator
PC33813 One Cylinder Small Engine Control IC
PC33814 Two Cylinder Small Engine Control IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor, Inc. MOTOROLA SEMICONDUCTOR TECHNICAL DATA Document order number: MC33991/D Rev. 0, 10/2002 Preliminary Information Gauge Driver Integrated Circuit The 33991device is a single packaged, Serial Peripheral Interface (SPI) controlled, dual stepper motor gauge driver Integrated Circuit (IC). This monolithic IC consists of four dual output H-Bridge coil drivers and the associated control logic. Each pair of H-Bridge drivers is used to automatically control the speed, direction and magnitude of current through the two coils of a 2-phase instrumentation stepper motor, similar to an MMT licensed AFIC 6405. 33991 Freescale Semiconductor, Inc...