FA3630V Datasheet | Fuji Electric

Description FA3630V is a DC-DC converter controller. This IC can directly drive a Nch/Pch-MOSFET. This IC is suitable to reduce converter size because it has many functions in a small package TSSOP. CMOS IC For Switching Power Supply Control s Dimensions, mm TSSOP-16 16 9 s Features - Low input voltage: 2.5V to 6.5V - 2-channels PWM control: Rail-to-rail output Output impedance of output stage = 3.5Ω (typ.) Nch-MOSFET driving (Ch1) Nch/Pch-MOSFET driving (Ch2)(selected by SEL pin) - Low power consumption: 0.7m A (typ.) - ON/OFFcontrol: Standby current= 0.1µA (typ.) - ±2% high accuracy reference voltage - Adjustable soft start time and maximum duty cycle - Adjustable built-in timer latch for short circuit protection - Wide range of operation frequency: 100k Hz to 1MHz - Package: TSSOP-16 (Thin and small) 4.4 6.4±0.1 5.2 0.07±0.05 1 8 2 0.17+0.0 - 0.04 0~8˚ 0.5±0.08 0.2±0.05 0.65 s Applications - Power supply for general equipment s Block diagram Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin symbol Description ON/OFF function Ch. 2 non-inverting input to error amplifier Ch.2 inverting input to error amplifier Ch. 2 output of error amplifier Selection of type of MOSFET drived Ground Soft start for Ch. 2 Ch. 2 output (for Nch or Pch MOSFET) Ch.1 outout (for Nch-MOSFET) Soft start for Ch.1 Power supply Regulated voltage output Ch.1 output of error amplifier Ch.1 inverting input to error amplifier Timing capacitor for timer latch delay Oscillator timing capacitor ON/OFF IN2+ IN2- FB2 SEL GND CS2 OUT2 OUT1 CS1 VCC VREG FB1 IN1- CP CT 1.1max FA3630V s Absolute maximum ratings Item Power supply voltage Symbol Rating 6.5 - 500 500 - 0.3 to +6.5 - 10 300 125 - 20 to +85 - 40 to +125 Unit V m A m A V m A m W °C °C °C s Remended operating conditions Item Power supply voltage Input voltage for logic input Oscillation frequency Symbol Min. 2.5 0 100 Max. 5.5 5.5 1000 Unit V V k Hz VCC Source peak current of OUT1/2 IOUT+ Sink peak current of OUT1/2 IOUT- Input voltage...