Datasheet4U Logo Datasheet4U.com

FA5331PM - Bipolar IC For Power Factor Correction

Description

FA5331P(M) and FA5332P(M) are control ICs for a power factor correction system.

These ICs use the average current control system to ensure stable operation.

With this system, a power factor of 99% or better can be achieved.

Features

  • 0~10˚ 0.7 0.40±0.1 1.27±0.2 DIP-16 FA5331P 16 9 s Block diagram 1 0.81 19.4 1.5 8 3.1min 4.3max 0.2min 3.4 6.5 0.3.
  • 0 7.6 +0.1 5 .0 2.54±0.25 0.5±0.1 0~15 ˚ 0~1 5˚ FA5332P 16 9 1 0.71 19.2 1.3 8 2.54min 5.06max Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin symbol IFB IIN.
  • VDET OVP VFB VIN.
  • GND OUT VC VCC CS ON/OFF REF SYNC CT IDET 0.51min Current error amplifier output Inverting input to current error amplifier Multiplier input Overvoltag.

📥 Download Datasheet

📁 Similar Datasheet

  • FA5500AN - (FA5500A / FA5501A) Power Supply Control IC (Fuji)
  • FA5500AP - (FA5500A / FA5501A) Power Supply Control IC (Fuji)
  • FA5500N - Power Supply Control IC (Fuji)
  • FA5500P - Power Supply Control IC (Fuji)
  • FA5501AN - (FA5500A / FA5501A) Power Supply Control IC (Fuji)
  • FA5501AP - (FA5500A / FA5501A) Power Supply Control IC (Fuji)
  • FA5501N - Power Supply Control IC (Fuji)
  • FA5501P - Power Supply Control IC (Fuji)
  • FA5510N - CMOS IC For Switching Power Supply Control (ETC)
  • FA5510N - Power Supply Control IC (Fuji)
Other Datasheets by Fuji Electric
  • FA5331P - Bipolar IC For Power Factor Correction
  • FA5332P - Bipolar IC For Power Factor Correction
  • FA5332PM - Bipolar IC For Power Factor Correction
  • FA5301BP - Bipolar IC For Switching Power Supply Control
  • FA5301BPN - Bipolar IC For Switching Power Supply Control
  • FA5304AP - Bipolar IC For Switching Power Supply Control
  • FA5304APS - Bipolar IC For Switching Power Supply Control
  • FA5305AP - Bipolar IC For Switching Power Supply Control

Full PDF Text Transcription

Click to expand full text
FA5331P(M)/FA5332P(M) FA5331P(M)/FA5332P(M) s Description FA5331P(M) and FA5332P(M) are control ICs for a power factor correction system. These ICs use the average current control system to ensure stable operation. With this system, a power factor of 99% or better can be achieved. FA5331P(M) is a 1st generation IC and FA5332P(M) is 2nd generation IC which light-load characteristics are improved. Bipolar IC For Power Factor Correction s Dimensions, mm SOP-16 16 9 5.5 7.8±0.3 • Drive circuit for connecting a power MOS-FET(Io =±1.
Published: |