6MBP100RTB060 Datasheet | Fuji Electric

Features - Temperature protection provided by directly detecting the junction temperature of the IGBTs - Low power loss and soft switching - High performance and high reliability IGBT with overheating protection - Higher reliability because of a big decrease in number of parts in built-in control circuit 600V / 100A 6 in one-package Maximum ratings and characteristics Absolute maximum ratings(at Tc=25°C unless otherwise specified) Item DC bus voltage DC bus voltage (surge) DC bus voltage (short operating) Collector-Emitter voltage INV Collector current Symbol Min. VDC VDC(surge) V SC VCES - 1 IC ICP -IC - 2 PC - 3 Tj VCC - 4 Vin - 5 Iin VALM - 6 IALM - 7 Tstg Topr Viso - 8 0 0 200 0 -0.5 -0.5 -0.5 -40 -20 Rating Max. 450 500 400 600 100 200 100 347 150 20 Vcc+0.5 3 Vcc 20 125 100 AC2.5 3.5 - 9 3.5 - 9 V V V V A A A W °C V V m A V m A °C °C k V N- m N- m Unit DC 1ms Duty=72.3% Collector power dissipation One transistor Junction temperature Input voltage of power supply for Pre-Driver Input signal voltage Input signal current Alarm signal voltage Alarm signal current Storage temperature Operating case temperature Isolating voltage (Case-Terminal) Screw torque Mounting (M5) Terminal (M5) Fig.1 Measurement of case temperature - 1 : Vces shall be applied to the input voltage between terminal P and U or V or W, N and U or V or W. - 2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.665/(100 x 2.6)x100=72.3% - 3 : Pc=125°C/IGBT Rth(j-c)=125/0.36=347W [Inverter] - 4 : Vcc shall be applied to the input voltage between terminal No. 3 and 1, 6 and 4, 9 and 7, 11 and 10. - 5 : Vin shall be applied to the input voltage between terminal No. 2 and 1, 5 and 4, 8 and 7, 13,14,15 and 10. - 6 : VALM shall be spplied to the voltage between terminal No. 16 and 10. - 7 : IALM shall be applied to the input current to terminal No. 16. - 8 : 50Hz/60Hz sine wave 1 minute. - 9 : Remendable Value : 2.5 to 3.0 N- m .. Electrical characteristics (at Tc=Tj=25°C, Vcc=15V unless otherwise specified.) Main...