FAR-M2SC Datasheet | Fujitsu Media Devices Limited

FUJITSU SEMICONDUCTOR DATA SHEET DS04-21703-3E ASSP Piezo Electric VCO M2 Series (D110) VOLTAGE CONTROLLED OSCILLATOR (4 to 30 MHz) s DESCRIPTION The M2 series (D110) Voltage Controlled Oscillators (VCO) directly oscillate in the frequency range of 4 to 30 MHz. The M2 series VCO use a piezoelectric single crystal with high electromechanical coupling coefficient (Li Ta O3: lithium tantalate) for stable and wide variable frequency width. Excellent S/N and jitter characteristic due to high Q of lithium tantalate can realize high quality playback sound and picture, especially in PLL circuit of digital audio and video equipments. s Features - Wider variable frequency width than quarts crystals: ±0.2% or more - High stability (100 times more stable than LC or TTL-IC VCO) - Excellent S/N and jitter characteristic due to high Q of lithium tantalate for high quality playback sound and picture. - Excellent temperature characteristic: - 300 ~ 500 ppm (- 10 ~ +70°C) - 10-pin SIP ready for high-density mounting. s PACKAGE M2 Series (D110) s TERMINAL ASSIGNMENT (Front view) Terminal No. 1 2, 3, 4, 5, 6, 7 8 9 10 Terminal Name VIN A-GND VOUT VCC D-GND Description Control voltage input terminal Analog grounding terminal Output terminal Power supply terminal Digital grounding terminal 10 9 8 7 6 5 4 3 2 1 D-GND VCC VOUT A-GND A-GND A-GND A-GND A-GND A-GND VIN Note: The GND terminals are not connected inside the module. Be sure to route them on the PC board. s MAXIMUM RATINGS Item Power supply voltage Input control voltage Power consumption Operating temperature Storage temperature Oscillation frequency range Symbol VCC VIN PD Ta Tstg - Rated value - 0.5 ~ +7.0 - 0.5 ~ +10.0 100 - 10 ~ +70 - 30 ~ +100 4 ~ 30 Unit V m W °C MHz s REMENDED OPERATING CONDITIONS Item Power supply voltage Input control voltage Operating temperature Symbol VCC VIN Ta Rated value 4.75 ~ 5.25 0~5 - 10 ~ +60 Unit V °C s STANDARD FREQUENCIES Frequencies 12.288 MHz 13.500 MHz 14.318 MHz 16.934 MHz Uses...