Datasheet4U Logo Datasheet4U.com

29LV160BE - MBM29LV160BE

General Description

The MBM29LV160TE/BE is a 16M-bit, 3.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each.

The MBM29LV160TE/BE is offered in a 48-pin TSOP (I), 48-pin CSOP and 48-ball FBGA packages.

Key Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The MBM29LV160TE/BE is erased when shipped from the factory. The device features single 3.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Da.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
29LV160B 16 Megabit CMOS 3 Volt-only Sector Erase Flash Memory AMD
29LV160BT MX29LV160BT Macronix International
29LV160C 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY Macronix International
29LV160DB AM29LV160DB AMD
29LV160M 16 Megabit 3 Volt-only Sector Erase Flash Memory AMD

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
29LV160BE MBM29LV160BE
29LV160TE90TN MBM29LV160TE90TN
29LV400BC MBM29LV400BC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUJITSU SEMICONDUCTOR DATA SHEET DS05-20883-2E FLASH MEMORY CMOS 16M (2M × 8/1M × 16) BIT www.DataSheet4U.com MBM29LV160TE/BE -70/90/12 s GENERAL DESCRIPTION The MBM29LV160TE/BE is a 16M-bit, 3.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The MBM29LV160TE/BE is offered in a 48-pin TSOP (I), 48-pin CSOP and 48-ball FBGA packages. The device is designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard MBM29LV160TE/BE offers access times of 70 ns, 90 ns and 120 ns, allowing operation of highspeed microprocessors without wait states.