Datasheet4U Logo Datasheet4U.com

MB86615 - IEEE 1394 Bus Controller

General Description

The MB86615 is 1394 serial bus controller compatible with the IEEE 1394 “FireWire” standard (IEEE Standard 1394-1995).

One built-in port plus a differential transceiver and comparator are provided to enable formation of networks in a 1394 cable environment.

Key Features

  • Compatible with IEEE 1394 high-performance serial bus standards Physical layer and link layer integrated on one chip 1 cable ports Supports s100 transfer speed (98.304 Mbit/sec) 3.3V single power supply operation Built-in PLL (for crystal oscillator) for internal clock signal generation Power saving modes 1) Forced sleep mode at instruction from MPU 2) Automatic sleep mode for non-connected ports.
  • Header and data unit.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MB86612 IEEE 1394 Bus Controller DVC)
MB86603 Communication Control Scsi-2 Protocol Controller Fujitsu Microelectronics
MB86603 (MB86603PFV) CMOS SCSI2 Protocol Controller ETC
MB86 Single Phase Bridge Rectifier Micro Commercial Components
MB86029 TV/VCR D/A Converter Fujitsu Media Devices Limited

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MB86612 IEEE 1394 Bus Controller
MB86613 IEEE 1394 Open HCI Controller
MB86613S IEEE1394 Open HCI Controller
MB86616 IEEE1394-SCSI Tailgate
MB86619 IEEE 1394 Serial Bus Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUJITSU SEMICONDUCTOR DATA SHEET DS04-22002-1E ASSP Communication Control IEEE 1394 Bus Controller (for DVC) MB86615 s DESCRIPTION The MB86615 is 1394 serial bus controller compatible with the IEEE 1394 “FireWire” standard (IEEE Standard 1394-1995). One built-in port plus a differential transceiver and comparator are provided to enable formation of networks in a 1394 cable environment. The MB86615 supports s100 data transfer speeds. By integrating the physical layer and link layer on one chip, The MB86615 is designed to reduce mounting area as well as power consumption. The MB86615 has an exclusive data port for isochronous transfer, provides automatic packetizing for sending and separation of header and data units at receiving, and is optimized for continuity of transfer processing.