MB89583B Overview
The MB89580B/BW series is a line of general-purpose, single-chip microcontrollers. In addition to a pact instruction set, these microcontrollers contain a variety of peripheral functions, such as PLL clock control, timers, a serial interface, a PWM timer, and the USB function. In particular, these microcontrollers contain one USB function channel to support both high and low speeds.
MB89583B Key Features
- Package type 64-pin LQFP package (0.5 mm pitch) and 64-pin QFP package (0.65 mm pitch)
- High-speed operations at low voltage Minimum execution time : 0.33 µs (Automatically generates a 12 MHz main clock and a
- F2MC-8L CPU core Instruction set that is optimum to the controllers -Multiplication and division instructions -16-bit ar
- PLL clock control The internal PLL clock circuit allows the use of low-speed clocks which are advantageous to noise char
- Various timers 8-bit PWM timer (can be used as either 8-bit PWM timer × 2 channels or PPG timer × 1 channel) Internal 21
- Internal USB transceiver circuit (patible with high and low speeds)
- USB function pliant to USB Protocol Revision 1.0 Support for both low and full speeds (selectable) Allows four endpoints
- UART/serial interface Built-in UART/SIO function (selectable by switching)
- External interrupt External interrupt (level detection × 8 channels) Eight inputs are independent of one another and can
- Low power consumption (standby mode supported) Stop mode (There is almost no current consumption since oscillation stops