MB95F104ANW Datasheet | Fujitsu Semiconductor Limited

DESCRIPTION The MB95100AM series is general-purpose, single-chip microcontrollers. In addition to a pact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller. - FEATURE - F2MC-8FX CPU core Instruction set optimized for controllers - Multiplication and division instructions - 16-bit arithmetic operations - Bit test branch instruction - Bit manipulation instructions etc. - Clock - Main clock - Main PLL clock - Sub clock (for dual clock product) - Sub PLL clock (for dual clock product) (Continued) Be sure to refer to the “Check Sheet” for the latest cautions on development. “Check Sheet” is seen at the following support page URL : http://.fujitsu./global/services/microelectronics/product/mi/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright©2006 FUJITSU LIMITED All rights reserved MB95100AM Series (Continued) - Timer - 8/16-bit pound timer × 2 channels - 16-bit reload timer - 8/16-bit PPG × 2 channels - 16-bit PPG × 2 channels - Timebase timer - Watch prescaler (for dual clock product) - LIN-UART - Full duplex double buffer - Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable .. - UART/SIO - Full duplex double buffer - Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable - I2C- Built-in wake-up function - External interrupt - Interrupt by edge detection (rising, falling, or both edges can be selected) - Can be used to recover from low-power consumption (standby) modes. - 8/10-bit A/D converter - 8-bit or 10-bit resolution can be selected - Low-power consumption (standby) mode - Stop mode - Sleep...