MB95F118BW Datasheet | Fujitsu Semiconductor Limited

DESCRIPTION The MB95110B series is general-purpose, single-chip microcontrollers. In addition to a pact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller. - FEATURES - F2MC-8FX CPU core Instruction set that is optimum to the controllers - Multiplication and division instructions - 16-bit arithmetic operation - Bit test branch instruction - Bit manipulation instructions etc. - Clock - Main clock - Main PLL clock - Sub clock (for dual clock product) - Sub PLL clock (for dual clock product) (Continued) Be sure to refer to the “Check Sheet” for the latest cautions on development. “Check Sheet” is seen at the following support page URL : http://.fujitsu./global/services/microelectronics/product/mi/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright©2006 FUJITSU LIMITED All rights reserved MB95110B Series (Continued) - Timer - 8/16-bit pound timer × 2 channels - 8/16-bit PPG × 2 channels - 16-bit PPG - Time-base timer - Watch prescaler (for dual clock product) - LIN-UART - Full duplex double buffer - Clock asynchronous (UART) or Clock synchronous (SIO) serial data transfer capable - UART/SIO .. - Full duplex double buffer - Clock asynchronous (UART) or Clock synchronous (SIO) serial data transfer capable 2C- - I Built-in wake-up function - External interrupt - Interrupt by edge detection (rising, falling, or both edges can be selected) - Can be used to recover from low-power consumption (standby) modes. - 8/10-bit A/D converter - 8-bit or 10-bit resolution can be selected - Low-power consumption (standby) mode - Stop mode - Sleep mode - Watch mode (for dual clock...