MB95F168J Datasheet | Fujitsu Semiconductor Limited

DESCRIPTION The MB95160M series is general-purpose, single-chip microcontrollers. In addition to a pact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller. - FEATURE - F2MC-8FX CPU core Instruction set optimized for controllers - Multiplication and division instructions - 16-bit arithmetic operations - Bit test branch instruction - Bit manipulation instructions etc. - Clock - Main clock - Main PLL clock - Sub clock - Sub PLL clock (Continued) Be sure to refer to the “Check Sheet” for the latest cautions on development. “Check Sheet” is seen at the following support page URL : http://.fujitsu./global/services/microelectronics/product/mi/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright©2007 FUJITSU LIMITED All rights reserved MB95160M Series (Continued) - Timer - 8/16-bit pound timer × 2 channels Can be used to interval timer, PWC timer, PWM timer and input capture. - 8/16-bit PPG × 2 channels - 16-bit PPG × 1 channel - Time-base timer × 1 channel - Watch prescaler × 1 channel - LIN-UART × 1 channel - LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable - Full duplex double buffer .. - UART/SIO × 1 channel - Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable - Full duplex double buffer - I2C- × 1 channel Built-in wake-up function - External interrupt × 8 channels - Interrupt by edge detection (rising, falling, or both edges can be selected) - Can be used to recover from low-power consumption (standby) modes. - 8/10-bit A/D converter × 8 channels 8-bit or 10-bit resolution can be selected. - LCD controller (LCDC) - 32 SEG × 4 (Max 128 pixels) - With blinking function - Low-power consumption (standby) mode - Stop...