Datasheet4U Logo Datasheet4U.com

MB86603 - Communication Control Scsi-2 Protocol Controller

General Description

The MB86603 is a SCSI-2 protocol controller (SPC) that facilitates interface control between the host computer (medium/small) and peripheral devices.

The specifications conform to the SCSI-2 standard but have an improved baud rate and extended functions.

Key Features

  • SCSI Bus Interface.
  • Operable as initiator and target.
  • Two types of data transfer.
  • Synchronous transfer: Max. 20 Mbytes/s, max. 32 offsets, 32-level baud rate.
  • Asynchronous transfer: Max. 10 Mbytes/s.
  • Transfer parameters (transfer mode, baud rate, transfer offset for 15 connected devices).
  • Single-end and differential transmissions Driver/receiver capable of driving 48-mA single-end heavy current.
  • Tristate bidirectional buffers for.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MB86603 (MB86603PFV) CMOS SCSI2 Protocol Controller ETC
MB86604L SCSI-II Protocol Controller Fujitsu Media Devices
MB86605 Wide SCSI-II Protocol Controller Fujitsu Media Devices
MB86606 Wide Fast-20 SCSI Protocol Controller Fujitsu Media Devices
MB86606A FAST-20 SCSI Protocol Controller Fujitsu Media Devices

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MB86H50 The Fujitsu H.264 Format Video-Processing IC
MB81F641642D 4 x 1M x 16-Bit SDRAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUJITSU SEMICONDUCTOR DATA SHEET DS04–22410–1E ASSP COMMUNICATION CONTROL SCSI-2 PROTOCOL CONTROLLER MB86603 DESCRIPTION The MB86603 is a SCSI-2 protocol controller (SPC) that facilitates interface control between the host computer (medium/small) and peripheral devices. The specifications conform to the SCSI-2 standard but have an improved baud rate and extended functions. The MB86603 supports high-speed synchronous transfer, wide transfer (16 bits), the MPU/DMA stand-alone system bus, and programmable commands, to enable configuration of high-performance systems. The MB86603 (SPC hereafter) is applicable to both single-end and differential transmissions and has a driver/receiver that can drive single-end heavy current (48 mA).