Fujitsu MB3790
The MB3790 is designed to control power supplies to SRAM, logic IC, or other circuit devices and protects them against momentary power failures by using backup batteries. Ideally designed as a single-chip IC for power supply control, the MB3790 consumes only a minimal current and comes in a thin-type package.| Part No. | MB3790 |
|---|---|
| Datasheet | MB3790 Download |
| Manufacturer |  Fujitsu |
| Description | Battery Backup IC |
| Buy | Stock & Price |
APPLICATIONS
Bi-CMOS Battery Backup IC MB3790 sDESCRIPTION
In addition to its function to supply the power to these devices, it has a function to switch the source of power to the primary or secondary backup battery when the power supply voltage drops below a predetermined level. Also, it outputs a reset signal when the power supply turns on or off or when a fault occurs in the power supply. Therefore, it is best suited for power supply control in memory cards and similar DataSheet4U.com other devices. DataShee sFEATURES
●●
●
● Input circuit current consumption when non-loaded: 50 µA [Typ] Output drive current: 200 mA [Max] Resistance between input and output: 0.5 ohms [Typ] Input power-down detection level: 4.2 V ± 2.5 % (Continued) s PACKAGES 16-pin Plastic SOP 20-pin Plastic TSSOP* (FPT-16P-M06) (FPT-20P-M04) * : Since the TSSOP is an extremely thin package, use a partial heating method when mounting the device. DataSheet4U.com DataSheet 4 U .com MB3790 (Continued)
● On-chip powe...
